{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Face reamer H7, uncoated, Nominal ⌀ DC: 3mm
Article no.: 162826 3
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | no | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Interface coding | ZYL00300100 | |
| Holder shape | Standard | |
| Holder version | metric | |
| Holder size, metric | 0030 mm | |
| Type of mounting | spigot | |
| Holder tolerance class | h6 | |
| Shank diameter | 3 mm | |
| Shank length | 28 mm | |
| Holder diameter, ISO tolerance class | 3 mm | |
| Holder diameter, lower dimension | -0.006 mm | |
| Cutter diameter 1st step min. | 3 mm | |
| Configurable | no | |
| Boring out allowance | 0.1 mm | |
| Hole to be created 1st step, ISO tolerance class | H7 | |
| Hole to be created 1st step, upper dimension | 0.01 mm | |
| Hole to be created 1st step, lower dimension | 0 mm | |
| Cutting edge length | 12 mm | |
| Number of teeth | 6 | |
| Twist direction | neutral, straight | |
| Helix angle max. | 0 degrees | |
| Graduation | the same | |
| Adjustment range | setting not possible | |
| Taper lead angle | 0 degrees | |
| Type of reaming tool | for through holes and blind holes | |
| Guide elements present | yes | |
| Type of drive | machine reamer | |
| Tool material | HSS-E | |
| Standard designation for cutting medium, 2nd Priority | HSS-E | |
| Standard designation for cutting medium, 3rd Priority | HSS-E | |
| Machining group | K (cast iron); N (non-ferrous metals); P (steel) | |
| Cutting media, manufacturer’s designation | HSS | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Gauge length | 33 mm | |
| Usable length | 30 mm | |
| Functional length | 30 mm | |
| Weight | 5 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | Werksnorm | |
| Data carriers | without data carrier | |
| Colour ring | green | |
| Type of product | cylindrical reamer | |
| Content | single part |
Identification & Classification
| Article number | 162826 3 | |
| EAN / GTIN | 4067263110590 | |
| Manufacturer number | 162826 3 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
20
N
20
P
15
P
12
P
12
P
10
P
10
K
10
N
20
Description
Version:
Chucking reamer cutting on the end face to achieve the most accurate size possible. The optimised end face cutting enables a precise alignment fit of the hole that is produced. Straight flute machine chucking reamers with long flutes for optimum chip evacuation.
Application:
For production of sequential holes with alignments that exactly match. For the highest demands for straightness of holes. For reaming of through holes and right to the bottom of blind holes.
Note:
Note the new shank tolerance h6. No. 162830 Configurable reamers are available in the diameter range from 2.200 to 12.220 mm and for any choice of fit.