{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Re-adjustable hand reamer, Nominal ⌀ DC: 11mm
Article no.: 160500 11
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Cutter diameter 1st step max. | 11.11 mm | |
| Cutter diameter 1st step min. | 11 mm | |
| Configurable | yes | |
| Cutting edge length | 51 mm | |
| Twist direction | left-hand | |
| Helix angle max. | 8 degrees | |
| Shank square | 9 mm | |
| Type of drive | hand reamer | |
| Tool material | HSS | |
| Coating | uncoated | |
| Gauge length | 86 mm | |
| Usable length | 84 mm | |
| Overall length | 142 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 859 | |
| Machining method | core drilling (BAB) | |
| Colour ring | without | |
| Type of product | cylindrical reamer | |
| Content | single part |
Identification & Classification
| Article number | 160500 11 | |
| EAN / GTIN | 4045197250674 | |
| Manufacturer number | 160500 11 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
P
P
P
Description
Version:
Up to 5 mm with straight flutes; from 6 mm with left hand helix 7 − 8°. The reamer body is slit and can be adjusted by approx. 1/100 of the reamer ⌀ using the expansion screw (e.g. 20 mm ⌀ = 0.2 mm).
Application:
For opening through holes to a slight oversize. Use the straight fluted reamers only in holes which are not interrupted. Make sure that the screw is not left tightened when stored.