{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Hand reamer Configurable, uncoated, Nominal ⌀ DC: 28mm
Article no.: 160200 28
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Even number of teeth with irregular spacing − teeth are exactly opposite each other; e. g. teeth 1 and 5.
Click to enlarge image
Product details
Technical Data
| Through-coolant | no | |
| Cutter diameter 1st step max. | 28.2 mm | |
| Cooling lubricant | no | |
| Interval configurability | 0.001 mm | |
| Tolerance zone | A; B; C; CD; D; E; EF; F; FG; G; H; J; JS; K; M; N; P; R; S; T; U; V; X; Y; Z; ZA; ZB; ZC | |
| Interface position | on the machine | |
| Holder type | square mounting | |
| Quality | 10; 11; 12; 13; 6; 7; 8; 9 | |
| Cutter diameter 1st step min. | 27.201 mm | |
| Configurable | yes | |
| Cutting edge length | 124 mm | |
| Number of teeth | 10 | |
| Twist direction | left-hand | |
| Helix angle max. | 8 degrees | |
| Graduation | unequal spacing | |
| Shank square | 22 mm | |
| Type of reaming tool | for through holes | |
| Type of drive | Hand reamer | |
| Tool material | HSS | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Gauge length | 155 mm | |
| Usable length | 153 mm | |
| Overall length | 247 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 206 B | |
| Colour ring | without | |
| Type of product | cylindrical reamer | |
| Content | single part |
Identification & Classification
| Article number | 160200 28 | |
| EAN / GTIN | 4045197927507 | |
| Manufacturer number | 160200 28 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
P
P
P
Description
Version:
With left-hand helix 7 − 8° and long taper lead, more than 1/4 of the cutting length. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer.
Hand reamers finish ground to match your specifications.
Hand reamers finish ground to match your specifications.
Application:
For through holes (not for blind holes). Also very suitable for interrupted holes.