{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Hand reamer H7, Nominal ⌀ DC: 30mm
Article no.: 160150 30
Article code:
Product details
Technical Data
| Cooling lubricant | no | |
| Holder type | Plain shank | |
| Holder version | metric | |
| Holder size, metric | 30 mm | |
| Shank diameter | 30 mm | |
| Shank length | 247 mm | |
| Cutter diameter 1st step min. | 30 mm | |
| Configurable | no | |
| Hole to be created 1st step, ISO tolerance class | H7 | |
| Hole to be created 1st step, upper dimension | 0.017 mm | |
| Hole to be created 1st step, lower dimension | 0.009 mm | |
| Cutting edge length | 124 mm | |
| Number of teeth | 10 | |
| Twist direction | left-hand | |
| Graduation | unequal spacing | |
| Shank square | 22.4 mm | |
| Type of reaming tool | for through holes | |
| Guide elements present | no | |
| Type of drive | Hand reamer | |
| Tool material | HSS | |
| Interface | joint 1; joint 2 | |
| Gauge length | 150 mm | |
| Usable length | 148 mm | |
| Overall length | 247 mm | |
| Cutting direction | left-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 206 B | |
| Machining method | boring out | |
| Colour ring | without | |
| Type of product | cylindrical reamer | |
| Content | single part |
Identification & Classification
| Article number | 160150 30 | |
| EAN / GTIN | 4045197937391 | |
| Manufacturer number | 160150 30 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
P
P
P
Description
Version:
With left-hand helix 7 − 8° and long taper lead, more than 1/5 of the cutting length. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer.
Application:
For through holes (not for blind holes). Also very suitable for interrupted holes.