{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Tap machine tap HSS-E-PM Form C 6GX, AlTiX, M: M4
Article no.: 136158 M4
Article code:
Product details
Technical Data
| Thread type | metric ISO coarse thread | |
| Tool material | HSS-E-PM | |
| Coating | AlTiX | |
| Thread D | M4 | |
| Thread pitch | 0.7 mm | |
| Core hole diameter | 3.3 mm | |
| Nominal diameter of metric thread D | 4 mm | |
| Overall length L | 63 mm | |
| Shank diameter DS | 4.5 mm | |
| Square-drive width across flats □ | 3.4 mm | |
| Thread tolerance class | 6GX; ISO 3X | |
| Taper lead form | C | |
| Application for type of drilling | blind hole | |
| Twist angle | 40 degrees | |
| Standard | DIN 371 | |
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Series | Master Tap | |
| Manufacturer’s designation | GARANT Master Tap Maschinen-Gewindebohrer HSS-E-PM Form C 6GX | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Length of shank LS | 37 mm | |
| Chisel edge diameter | 3.23 mm | |
| Length of tapping part Lc | 7.3 mm | |
| Tap infeed length | 1.75 mm | |
| Taper lead angle | 12.4 degrees | |
| Number of teeth | 3 | |
| Twist direction | right-hand | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| To depth (x diameter) | 2.5 | |
| Number of clamping slots | 3 | |
| Flank angle | 60 degrees | |
| Cutting media, manufacturer’s designation | HSS-E-PM | |
| Interface | joint 1 | |
| Gauge length A | 63 mm | |
| Weight | 10 g | |
| Cutting direction | right-hand cutting | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | green | |
| Type of product | taps |
Identification & Classification
| Article number | 136158 M4 | |
| EAN / GTIN | 4045197900104 | |
| Manufacturer number | 136158 M4 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
30
N
35
N
20
P
30
P
30
P
25
P
12
P
8
M
10
M
8
K
20
N
20
Description
Version:
Universal taps, designed for use in a wide spectrum of materials with high process reliability.
Tolerance class: ISO 3X/6GX
- HSS-E-PM tool material for maximum wear resistance.
- Reduced coefficient of friction due to the new high-performance coating.
- Special geometry for optimum swarf evacuation.
Tolerance class: ISO 3X/6GX
Application:
For components which are galvanised or shrink slightly when hardened.
Recommendation:
We recommend increasing the size of the tapping hole ⌀ by the tolerance allowance.