{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Machine tap for synchronised spindles HSS-E-PM IC / Form C, DLC, M: M16
Article no.: 134285 M16
Article code:
Product details
Technical Data
| Thread type | M | |
| Colour ring | yellow | |
| Thread D | M16 | |
| Thread pitch | 2 mm | |
| Core hole diameter | 14 mm | |
| Overall length L | 110 mm | |
| Shank diameter DS | 12 mm | |
| Square-drive width across flats □ | 9 mm | |
| Flank angle | 60 degrees | |
| Taper lead form | C | |
| Thread tolerance class | ISO 2X 6HX | |
| Through-coolant | yes | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Holder tolerance class | h6 | |
| Length of shank LS | 60 mm | |
| Shank type | HB | |
| Cooling lubricant | yes | |
| Nominal diameter of metric thread D | 16 mm | |
| Chisel edge diameter | 13.65 mm | |
| Length of tapping part Lc | 20.5 mm | |
| Tap infeed length | 4.58 mm | |
| Taper lead angle | 15 degrees | |
| Number of teeth | 3 | |
| Twist direction | right-hand | |
| Twist angle | 40 degrees | |
| Type of thread-cutting tool | maskinsnittapper til synkron bearbejdning | |
| Application for type of drilling | blind hole | |
| To depth (x diameter) | 2.5 | |
| Number of clamping slots | 3 | |
| Tool material | HSS-E-PM | |
| Coating | DLC | |
| Interface | joint 1 | |
| Gauge length A | 110 mm | |
| Weight | 181 g | |
| Cutting direction | right-hand cutting | |
| Standard | Werksnorm | |
| Machining method | thread processing internal (EGI) | |
| Type of product | taps |
Identification & Classification
| Article number | 134285 M16 | |
| EAN / GTIN | 4045197649331 | |
| Manufacturer number | 134285 M16 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
30
N
35
N
20
N
25
N
20
N
25
N
55
N
35
Description
Version:
Sturdy version with right-hand helix and shank to DIN 1835-B.Special geometry for use on machines with synchronised spindle drives. The tap is controlled by the synchronising spindle of the machine. With the latest generation of special DLC coating sp2 for optimum tool life. For use with emulsion (fat content minimum 8%).
With internal coolant supply for maximum tool life.
With internal coolant supply for maximum tool life.