{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Machine tap for cast iron, nitrided, M: M20
Article no.: 132500 M20
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Guss-Maschinen-Gewindebohrer M M20 | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Shank diameter DS | 16 mm | |
| Shank length LS | 83.55 mm | |
| Thread type | M | |
| Thread nominal diameter metric | 20 mm | |
| Thread | M20 | |
| Thread pitch | 2.5 mm | |
| Thread tolerance class | ISO 2X 6HX | |
| Length of tapping part Lc | 34.35 mm | |
| Tap infeed length | 5 mm | |
| Taper lead angle | 14.72 degrees | |
| Number of teeth | 4 | |
| Twist direction | neutral, straight | |
| Twist angle | 0 degrees | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| Taper lead form | C | |
| Application for type of drilling | through hole; blind hole | |
| To depth (x diameter) | 3; 3 | |
| Number of clamping slots | 4 | |
| Core hole diameter | 17.5 mm | |
| Core hole diameter guideline value | 17.5 mm | |
| Flank angle | 60 degrees | |
| Square-drive width across flats □ | 12 mm | |
| Tool material | HSS-E | |
| Cutting media, manufacturer’s designation | HSS-E | |
| Interface | joint 1 | |
| Gauge length A | 140 mm | |
| Overall length L | 140 mm | |
| Weight | 200 g | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 376 | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | white | |
| Type of product | taps |
Identification & Classification
| Article number | 132500 M20 | |
| EAN / GTIN | 4045197071859 | |
| Manufacturer number | 132500 M20 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
K
13
K
9
Description
Version:
With straight flutes and short chamfer lead (2 − 3 turns).
Version - image:
4 cutting edges (from size M5).
4 flutes (from size M5).
Particularly wear resistant due to nitrided surface (13 2500).
4 flutes (from size M5).
Particularly wear resistant due to nitrided surface (13 2500).