{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Machine tap with interrupted thread, uncoated, M: M2
Article no.: 131650 M2
Article code:
Product details
Technical Data
| Tool material | HSS-E | |
| Coating | uncoated | |
| Cutting direction | right-hand cutting | |
| Thread D | M2 | |
| Thread pitch | 0.4 mm | |
| Thread type | metric ISO coarse thread | |
| Thread tolerance class | ISO 2 6H | |
| Core hole diameter | 1.6 mm | |
| Application for type of drilling | through hole | |
| Shank diameter DS | 2.8 mm | |
| Square-drive width across flats □ | 2.1 mm | |
| Overall length L | 45 mm | |
| Taper lead form | B | |
| Standard | DIN 371 | |
| Flank angle | 60 degrees | |
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Length of shank LS | 29.06 mm | |
| Nominal diameter of metric thread D | 2 mm | |
| Length of tapping part Lc | 8.48 mm | |
| Tap infeed length | 1.6 mm | |
| Taper lead angle | 8 degrees | |
| Number of teeth | 3 | |
| Twist direction | neutral, straight | |
| Twist angle | 0 degrees | |
| Type of thread-cutting tool | machine tap for conventional machining | |
| Cutting part version | with exposed turns of a thread | |
| To depth (x diameter) | 3 | |
| Number of clamping slots | 3 | |
| Interface | joint 1 | |
| Usable length L1 | 6 mm | |
| Weight | 2 g | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | without | |
| Type of product | taps | |
| Thread profile | full profile V |
Identification & Classification
| Article number | 131650 M2 | |
| EAN / GTIN | 4045197069894 | |
| Manufacturer number | 131650 M2 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
13
P
15
P
15
K
9
Description
Version:
Spiral point.
With interrupted thread, this reduces torque and improves distribution of the lubricant.
With interrupted thread, this reduces torque and improves distribution of the lubricant.
Advantage:
Ideally suited for use on resilient materials and thin-walled components. Low frictional resistance, thus no material deformation is caused.