{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Tie rod end puller for heavy trucks, with 55 mm jaw opening, 20 t max. tension force
Article no.: 129-5-50
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Identification & Classification
| Article number | 129-5-50 | |
| EAN / GTIN | 4021176123313 | |
| Manufacturer number | 129-5-50 | |
| L-Number | L80010 2501 | |
| Manufacturer/responsible person | Kleinbongartz & Kaiser oHG, Heinrich-Hertz-Straße 5, 40704 HILDEN, Germany, www.kukko.com |
Description
Description:
- The 2-jaw puller for heavy trucks of the series 129 is used for mechanically pressing out the ball studs when removing ball joints on thrust and steering rods. The series 129 impresses with its versatility of applications. Within the series, there are different sizes of ball joint presses with varying jaw openings. The lever clamping range can be adjusted via the thread of the center spindle.
- The extra strong version of the base body and reinforced fork is particularly suitable for heavy trucks and low-floor buses.
- With the center spindle, the press can be adjusted and pre-tensioned.
Feature:
- Material: tool steel
- Total width [mm]: 90 mm
- Total width [inch]: 3 9/16
- Total depth [mm]: 235 mm
- Total depth [inch]: 9 1/4
- Total height [mm]: 205 mm
- Total height [inch]: 8 1/16
- Width across flats [mm]: 27 mm
- Max. torque [Nm]: 420 Nm
- Max. torque [ft lb]: 309.79
- Max. tensile force [kN]: 200 kN
- Max. tractive force [t]: 20 t
- Max. pulling force [US t. sh.]: 22.05
- Spare parts available: Yes
- Fork thickness at the tip, K [mm]: 6 mm
- Fork thickness at the tip, K [inch]: 1/4
- Fork opening (jaw opening) [mm]: 55 mm
- Fork opening (mouth opening) [inch]: 2 3/16
- Fork height (jaw height) [mm]: 28,5 mm
- Fork height (mouth height) [inch: 1 1/8
- Lever clamping range [mm]: 120 mm
- Lever clamping range [inch]: 4 3/4
- Can be sold worldwide: Yes (REACH, RoHS, POP, PROP65, TSCA)