{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Carbide hole saw flat, ⌀ DC: 45mm
Article no.: 118500 45
Article code:
Product details
Technical Data
| Lubrifiant | non | |
| Position des interfaces | côté machine | |
| Type de barre | Queue cylindrique | |
| Format d’image | surface de serrage droite | |
| Diamètre de queue | 10 mm | |
| Dimension supérieure du diamètre nominal | 0,1 mm | |
| Dimension inférieure du diamètre nominal | -0,05 mm | |
| Type de queue | HB | |
| Diamètre des dents, min. | 45 mm | |
| Diamètre des dents, max. | 45 mm | |
| Tolérance diamètre des dents | tolérance fabricant | |
| Tolérance de fabrication min. | -0,05 mm | |
| Tolérance de fabrication max. | 0,1 mm | |
| Longueur des goujures | 8 mm | |
| Utilisation avec le type d’alésage | trou débouchant | |
| Nuance de coupe | Carbure | |
| Interface | interface 1 | |
| Longueur utile | 8 mm | |
| Sens de la coupe | coupe à droite | |
| Exécution outil | porte-outils en acier avec plaquettes de coupe en matériau dur brasé suivant DIN ISO 513 (Hx, Cx, Bx, Dx) | |
| Norme | Werksnorm | |
| Procédé d’usinage | perçage dans la masse | |
| Bague de couleur | sans | |
| Type de produit | fraise à trépaner | |
| Sommaire | pièce unique |
Identification & Classification
| Article number | 118500 45 | |
| EAN / GTIN | 4045197037374 | |
| Manufacturer number | 118500 45 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
70
P
50
P
50
M
35
N
80
Description
Version:
Extremely strong and with perfect concentricity due to drill crown and shank of one piece (hardened).
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 2 mm for all sizes. ⌀ tolerance: + 0.10 / − 0.05 mm.
Dimension L: all sizes = 8 mm.
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 2 mm for all sizes. ⌀ tolerance: + 0.10 / − 0.05 mm.
Dimension L: all sizes = 8 mm.
Application:
For use on stationary machines. Suitable for fibre-reinforced plastics (GRP and CRP).
Only for flat material up to 4 mm thickness.
Only for flat material up to 4 mm thickness.