Hoffmann Group Home
  • 500.000 listed articles
  • Highest delivery accuracy
  • TÜV certified quality of delivery
  • Menu
Item no.: 179700

Carbide-tipped circular saw blade Rake angle negative

Brand: GARANT
Tool material Carbide
No price available

Carbide-tipped circular saw blade Rake angle negative

In stock
More from the category Saws
More about GARANT

Description

Version:

High performance toothing with high teeth and lower finishing teeth. The trapezoidal carbide tips cut easily and generate clean cut surfaces.

Advantage:

Particularly suitable for hard anodised profile material.

Application:

On high-speed machines.
F = fine tooth pitch for thin walled profiles or plates up to 5 mm thickness.
M = medium tooth pitch for profiles and pipes with greater than 5 mm thickness.
G = coarse tooth pitch for solid material such as bars and rods.
Negative rake angle 6° for use on machines with oscillating saw blade infeed from above. Advantageous for thin profiles.

Note:

  • Recommended cutting speed: 40 − 80 m/s, for harder materials such as alloys, brass, bronze it is preferable to use the lowest recommended speed.
  • Pay special attention to maintaining an even feed rate; this prevents damage.
  • Size 400×. . . − When ordering please be sure to indicate: bore dia. (if other than 30 mm), and if necessary the number, and pitch circle diameter of the drive holes (ML).
    Example: 1×400×40 M − 2 ML 12/64.
    Further circular saw blades can be found in Group 58.

Technical Data

Tool material
Carbide 

Application Table

Aluminium (short chipping)
N
850
Alu > 10% Si
N
650
CuZn
N
450
wet minimum
 
dry
 
Air