{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Digital height gauge and marking-out system with signal probe 300 mm
Article no.: 445222 300
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
With protractor No. 45 3500 and holder No. 45 3520 (not included).
- Standard: Manufacturer’s standard
- Interface: USB interface; Digimatic interface
Product details
Technical Data
| Standard | Manufacturer’s standard | |
| Article no of the battery / rechargeable battery fitted | 081560 357 | |
| Marking height | 300 mm | |
| Scale divisions | 0.005 mm | |
| Error limit | 0.02 mm | |
| Interface | USB interface; Digimatic interface | |
| Power supply | Battery-powered | |
| Number of batteries contained | 1 | |
| Battery life approx. | 3,500 h | |
| Measurement technology | digital | |
| Base length | 135 mm | |
| Base width | 91 mm | |
| Type of product | Height gauge and marking device |
Identification numbers & Classifications
| Article number | 445222 300 | |
| EAN / GTIN | 2050001062291 |
Description
Version:
Direct reading from clear digital display. Battery operation with very low current consumption. Data storage key − The measurement result can be stored by pressing a key. All critical parts are hardened. Great stability by two parallel hardened columns with rack teeth on the inner faces (size 1000 has 3 columns). 2 preset values permit reference values to be saved (e. g. granite table and workpiece). Carbide tipped scriber. Sturdy base with hardened and lapped surface. Crank on the back of the display housing for quick adjustment and a hand wheel for fine adjustment.
Additionally with signal contact point. Particularly suitable for absolute measurements, comparison measurements and measurement of chained dimensions.
Additionally with signal contact point. Particularly suitable for absolute measurements, comparison measurements and measurement of chained dimensions.
Application:
The probe emits an acoustic signal when it touches the measured face. The measured value is also maintained when moving on (2 mm over-run), easy to use. The probe tip ⌀ is automatically compensated.