{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 206273 5
Solid carbide end torus cutter HPC 5 mm
Article no.: 206276 5
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: h9
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 5 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | h9 | |
| No. of teeth Z | 4 | |
| Helix angle | 12 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h6 | |
| Machining strategy | HPC | |
| Dimension ap max transverse | 0.17 mm | |
| Programming radius | 0.5 mm | |
| Flute length Lc | 3 mm | |
| Overhang length L1 incl. recess | 13 mm | |
| Recess ⌀ D1 | 4.6 mm | |
| Overall length L | 60 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed f z in steel < 60 HRC | 0.078 mm | |
| Colour ring | red | |
| Type of product | End torus mill |
Identification numbers & Classifications
| Article number | 206276 5 | |
| EAN / GTIN | 4045197584601 |
Application Table
P
125
H
100
H
90
H
50
Description
Version:
Special centre cutting edge geometry for traverse milling at very high feed rates.
Application:
For copy and traverse milling in hard machining under HPC / HSC conditions. Special milling strategies allow very high metal removal rates.
Note:
Comply strictly with ap max! Recommended application values (vc and fz) apply to ap max.
Use milling cutter up to the wear limit − special geometry not suitable for regrinding!
Use milling cutter up to the wear limit − special geometry not suitable for regrinding!