{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide end torus cutter HPC 6 mm
Article no.: 206272 6
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: h9
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 6 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h9 | |
| No. of teeth Z | 4 | |
| Helix angle | 20 degrees | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h6 | |
| Machining strategy | HPC | |
| Dimension ap max transverse | 0.4 mm | |
| Programming radius | 1 mm | |
| Flute length Lc | 3 mm | |
| Overhang length L1 incl. recess | 13 mm | |
| Recess ⌀ D1 | 5.2 mm | |
| Overall length L | 60 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed fz in steel < 900 N/mm2 | 0.106 mm | |
| Colour ring | without | |
| Type of product | End torus mill |
Identification numbers & Classifications
| Article number | 206272 6 | |
| EAN / GTIN | 4045197414908 |
Application Table
P
155
P
145
P
140
P
130
Description
Version:
Special centre cutting edge geometry for traverse milling at very high feed rates.
Application:
For copy and traverse milling over the full range of hard machining under HPC/HSC conditions.
Using special milling strategies very high rates of metal removal can be achieved.
Using special milling strategies very high rates of metal removal can be achieved.
Note:
ap max − comply strictly!
Recommended application values (vc and fz) apply to ap max.
Use milling cutter up to the wear limit − special geometry not suitable for regrinding!
Recommended application values (vc and fz) apply to ap max.
Use milling cutter up to the wear limit − special geometry not suitable for regrinding!