{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Alu PickPocket solid carbide torus cutter HPC 10/1,0 mm
Article no.: 206261 10/1,0
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: W
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Series | Master Alu | |
| Cutting edge ⌀ DC | 10 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | W | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.5×D for side milling; Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 16 mm | |
| Corner radius R1 | 1 mm | |
| Overhang length L1 incl. recess | 68 mm | |
| Recess ⌀ D1 | 9.2 mm | |
| Overall length L | 110 mm | |
| Shank ⌀ Ds | 10 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.05 mm | |
| Feed fz for copy milling in short-chipping aluminium | 0.06 mm | |
| Colour ring | yellow | |
| Type of product | Torus cutter |
Identification numbers & Classifications
| Article number | 206261 10/1,0 | |
| EAN / GTIN | 4062406398484 |
Application Table
N
340
N
320
N
290
N
150
N
120
N
150
N
110
N
100
N
130
N
120
N
110
N
100
N
110
N
220
N
120
N
150
Description
Version:
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping non-ferrous materials.
Very high feed rates when plunging vertically. Ramping capability up to 45°.
Tolerances:
R1 > 0.5 − 1.5 tolerance ±0.03 mm.
R1 > 1.5 tolerance ±0.05 mm.
Very high feed rates when plunging vertically. Ramping capability up to 45°.
Tolerances:
- Corner radius
R1 > 0.5 − 1.5 tolerance ±0.03 mm.
R1 > 1.5 tolerance ±0.05 mm.