{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 789204 38X520
“7” SDS-max carbide-tipped hammer drill 38X520 mm
Article no.: 789205 38X520
Article code:
- Tool material: Carbide
- Use with impact / without impact: Impact drilling
- Shank: SDS Max
Find similar products here:
Product details
Technical Data
| ⌀ | 38 mm | |
| overall length | 520 mm | |
| Flute length | 400 mm | |
| Tool material | Carbide | |
| Use with impact / without impact | Impact drilling | |
| Shank | SDS Max | |
| Number of cutting edges Z | 4 | |
| Type of product | Masonry drill |
Identification numbers & Classifications
| Article number | 789205 38X520 | |
| Manufacturer number | 2608586800 |
Description
Version:
Drill head with square cross section from ⌀ 16 mm. Special carbide insert geometry for longer tool lives.
Centring point allows accurate spot drilling and good guidance of the centre within the hole. Large flute channels for quick evacuation of waste material, resulting in less friction.
Centring point allows accurate spot drilling and good guidance of the centre within the hole. Large flute channels for quick evacuation of waste material, resulting in less friction.
Application:
For drilling concrete, natural stone, and masonry.
Note:
When using long drills > 500 mm, first drill a pilot hole at least 150 mm deep with a shorter drill (preferably of the same ⌀).