{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Torque screwdriver set, 8 pieces with scale, to take interchangeable blades, ESD 50 cNm
Article no.: 659919 50
Article code:
- electrostatic characteristic: EGB/ESD
- Direction of tightening: Right-hand tightening
- Torque measuring accuracy: ±6
- Test certificate: Manufacturer’s test certificate
- Calibration: O1
Product details
Technical Data
| Manufacturer's designation | MecaTorque ESD | |
| maximum torque | 50 cNm | |
| electrostatic characteristic | EGB/ESD | |
| Direction of tightening | Right-hand tightening | |
| Torque measuring accuracy | ±6 % | |
| Test certificate | Manufacturer’s test certificate | |
| Calibration | O1 | |
| Overall length L | 106 mm | |
| Torque range | 0.1 Nm - 0.5 Nm | |
| Torque range | 10 cNm - 50 cNm | |
| Scale graduation, 1 graduation = | 1 cNm | |
| Display | analogue | |
| Release signalling | akustisk; haptisk | |
| Trigger principle | mechanical slip clutch | |
| Connection format | exchangeable blade | |
| Measurement technology | mechanical | |
| Data can be recorded | no | |
| Setting the trigger value | with adjustment scale | |
| Feedback | triggering | |
| Reversible reading | cNm | |
| Measurement process | Torque | |
| Adjustable trigger value | adjustable | |
| Standard | DIN EN ISO 6789 | |
| Drive profile | Hexagon screwdriver; Screwdriver for Phillips; Slot-head screwdriver; Screwdriver for TORX® screws | |
| Type of product | Torque screwdriver |
Identification numbers & Classifications
| Article number | 659919 50 | |
| EAN / GTIN | 7610733269488 | |
| Manufacturer number | 8316.A1 ESD |
Description
Version:
Power grip with a non-allergenic elastomer coating. On reaching the set torque value, the screwdriver can be felt and heard to trigger and is then again immediately ready for use. The release torque is higher than the tightening torque (overload protection). The desired torque is set using an adjustment wheel at the end of the handle. Putting the wheel into the locked position prevents inadvertent changes to the setting. Easy to read micrometer scale, protected against dirt.
Tool handle made of conductive plastic, suitable for ESDs.
Tool handle made of conductive plastic, suitable for ESDs.
Standard:
Tested to DIN EN ISO 6789.