{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Linishing belt zirconium aluminium oxide (ZA) ZK713T 40
Article no.: 558260 40
Article code:
- Grinding medium code: ZA
- Iron, sulphur and chlorine constituents: < 0.1
Product details
Technical Data
| Series | Tooth configuration ZK713T | |
| Grinding medium code | ZA | |
| Grit | 40 | |
| Iron, sulphur and chlorine constituents | < 0.1 % | |
| Linishing belt width | 30 mm | |
| Linishing belt length | 533 mm | |
| Type of product | Linishing belt |
Identification numbers & Classifications
| Article number | 558260 40 | |
| EAN / GTIN | 4018875727379 | |
| Manufacturer number | 738487 |
Application Table
35
32
20
32
25
20
18
10
30
23
Description
Version:
High-performance linishing belt with Zirconium Aluminium Oxide (ZA) for a high removal rate. The continuous self-sharpening characteristics of Zirconium Aluminium Oxide permit longer belt life at higher removal rates and a more consistent surface quality compared to Aluminium Oxide.
T-fabric (sturdy and flexible) with special flexibility for working in tight radii with hand-held machines.
T-fabric (sturdy and flexible) with special flexibility for working in tight radii with hand-held machines.
Application:
For use on all steels and steel alloys, cast iron, and also non-ferrous metals.
Note:
Other grit sizes, qualities, and dimensions are available on request in line with the manufacturer’s minimum order quantities. Unless specified otherwise on the order, belts will be supplied with standard joints. See No. 568526ff for spare linishing belts for burnishing machines.