{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Self-centring lathe chuck with base and hard top jaws 160
Article no.: 313120 160
Article code:
Product details
Technical Data
| Standard | DIN 702-4 | |
| Type | 160 | |
| Clamping range with external hard top jaws | 5 mm - 161 mm | |
| Clamping range with internal hard top jaws | 67 mm - 174 mm | |
| Clamping stroke per jaw S | 6.2 mm | |
| External ⌀ A | 164 mm | |
| Aperture E | 42 mm | |
| Chuck height D | 63 mm | |
| Centring ⌀ B | 145 mm | |
| Chuck key square socket K | 10 mm | |
| Weight | 9.3 kg | |
| maximum speed | 5,400 rpm | |
| Colour code for accessories | Röhm self-centring chucks and jaws | |
| Type of product | Self-centring chucks |
Identification numbers & Classifications
| Article number | 313120 160 | |
| EAN / GTIN | 4019208227771 | |
| Manufacturer number | 437490 |
Description
Version:
- Maximum concentricity and changeover accuracy.
- With jaw retention, centrically clamping.
- Large pass-through diameter.
- Accuracy twice that specified by DIN 6386.
- High clamping force with low force exertion.
- Higher speeds thanks to safety blocking slide.
- Jaws can quickly and easily be reversed or exchanged.
- Outer contour with drop-off wedge for water.
- Grease nipple for greasing all sliding faces.
Advantage:
Wherever extremely high clamping forces, high concentricity, and reliable continuous repeatability are required.
Application:
For machine spindles with recessed centring mount or for mounting using a flange. Secured with screws from the front. The flange blanks must always be fitted first to the machine and then to the chuck.
Material:
Entirely made of steel, fully surface-hardened.
Supplied with:
Includes: 1 set of jaws, 1 chuck key, 1 set fastening screws.
Note:
Bore E can be bored out: Size 160 to 45 mm, size 200 to 55 mm, size 250 to 75 mm, size 315 to 102 mm (at additional charge).