{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Sine bar, Roller centre spacing: 100mm
Article no.: 483000 100
Article code:
- Standard: DIN 2273
- all parts: hardened
Find similar products here:
Product details
Technical Data
| Standard | DIN 2273 | |
| Width without rollers | 15 mm | |
| all parts | hardened | |
| Roller centre spacing | 100 mm | |
| Height without rollers | 29.5 mm | |
| Accuracy of the roller spacing | ±0.002 mm | |
| Parallelism of the contact surface to the roller face | ±0.0025 mm | |
| Type of product | Sine bar |
Identification numbers & Classifications
| Article number | 483000 100 | |
| Manufacturer number | 483000 100 |
Description
Version:
Through hardened and precision ground, with end stop for securing the component against slipping.
Application:
For precise checking and setting of angles using gauge blocks on the sine principle. (Gauge blocks see No. 480200 − 481310).
Supplied with a conversion table of degrees / minutes into mm (e.g. - in order to obtain an angle of 10°, - gauge blocks of 17.365 mm in height have to be placed under one roller of the sine bar).
Supplied with a conversion table of degrees / minutes into mm (e.g. - in order to obtain an angle of 10°, - gauge blocks of 17.365 mm in height have to be placed under one roller of the sine bar).