{{ name }}
Artikelnummer {{ combinedCodeWithHighlight }}
Klantartikelnummer:
EAN/GTIN:
Nummer fabrikant:
Aantrekbout afgedicht, met boring, Geschikt voor conus: 40
Artikelnummer: 308635 40
Klantartikelnummer:
- Aantrekbouten-norm: ISO 7388-3
Productdetails
Technische gegevens
| Geschikt voor conus | 40 | |
| Boringeigenschap | met boring | |
| Aantrekbouten-norm | ISO 7388-3 | |
| Kraag-⌀ D | 22 mm | |
| Kop-⌀ D1 | 18,95 mm | |
| Totale lengte L | 47,5 mm | |
| L1 | 19,25 mm | |
| Schroefdraad M | M16 | |
| Maximaal aanhaalmoment | 50 Nm | |
| Geschikt voor conus met kleurcode | SK 40 | |
| Sleutelwijdte | 19 mm | |
| Producttype | Aantrekbout |
Identificatienummers en classificaties
| Artikelnummer | 308635 40 | |
| EAN/GTIN | 4045197644480 | |
| Nummer fabrikant | 308635 40 |
Omschrijving
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
- For tools with taper shanks see also DIN 69871 and JIS B 6339 (MAS-BT).
- In machining centres (machines with automatic tool changers).
- In NC machines (machines without automatic tool changers).
Suitable for:
FADAL, similar to ISO 7388, 3 mm, extended.
Note:
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Sealed − with O-ring.
When installing the pull stud, cheque the correct tightening torque.
Sealed − with O-ring.
No suitable chuck key available.