{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT FootSwitch HCT, Type: FS
Article no.: 498997 FS
Article code:
Product details
Technical Data
| Plug type, input | F | |
| Series | HCT | |
| Power supply | mains-powered | |
| Length of cable | 1.5 m | |
| Type of connection | output | |
| Range | 10 m | |
| Wireless application | HCT Windows App | |
| Type of product | Foot switch | |
| Connection | USB | |
| Type of transmission | radio; plug connection | |
| Length | 200 mm | |
| Width | 100 mm | |
| Height | 50 mm |
Identification & Classification
| Article number | 498997 FS | |
| EAN / GTIN | 4067263132202 | |
| Manufacturer number | 498997 FS | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Non-contact transmission of measurement values – no impact on the measurement set-up.
- Radio receiver integrated into FootSwitch / HandSwitch for simple and reliable connection of HCT measuring tools to different workstations and computers.
- Simple configuration via MS Excel without the need for additional software.
- No need for authorisation to install software on the computer.
- Very reliable connection with HCT tools using only the USB port on the computer.
- Measurement values can be uniquely assigned via freely selectable names.
- The FootSwitch / HandSwitch can trigger the transmission of measurement values either in parallel or sequentially.
Warning:
Intended use
Reasonably foreseeable misuse
- For connection to a USB port.
- For use indoors.
- For use at room temperature.
- For work in industrial environments.
- Use only when it is technically in good condition and safe to operate.
- Activities may only be carried out by trained and authorised personnel.
Reasonably foreseeable misuse
- Do not use in explosion hazard areas.
- Do not open the casing.
- Do not make any unauthorised modifications.
- Not for use where there is exposure to intense heat, direct sunlight, naked flames or liquids.
- No do expose it to water, precipitation or contamination.
- Do not subject it to blows, impacts or heavy loads.
- Do not operate outdoors or in rooms with high atmospheric humidity.
- Not for use in areas where high concentrations of dust, flammable gases, vapours or solvents are present.
- If the casing is damaged, do not continue to use the work lamp.
- Do not operate unattended.