{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Pair of driver’s gloves, lined, Glove size: 8
Article no.: 094392 8
Article code:
Product details
Technical Data
| Contents pairs | 1 pair | |
| Cut protection class, EN 388 | B | |
| Version, EN 388 | EN388:2016 | |
| Resistance to abrasion | 2 | |
| Resistance to cuts (Coupe test) | 1 | |
| Tear propagation resistance | 2 | |
| Resistance to penetration | 1 | |
| Resistance to cuts (TDM) | X | |
| Impact protection | not defined | |
| Type of leather | nappa leather | |
| Animal, nappa leather | goat | |
| Thickness | 0.7 mm | |
| EN 388 code | 2121X | |
| Colour | black; white | |
| Type of product | gloves | |
| Area of application | cut protection | |
| Glove size | 10; 11; 8; 9; 10; 11; 8; 9; 8 | |
| Scope of application | all-round | |
| Closure | hook-and-loop fastener | |
| Version | five-fingered | |
| Reuse | reusable | |
| Unit | pair | |
| Standard | EN 388; EN ISO 21420 | |
| Backing material | leather; textile | |
| Coating | no coating | |
| Lined | yes | |
| Characteristics | breathable; silicone-free | |
| Protection category | II | |
| Overall length | 250 mm | |
| Total weight | 104 g |
Identification & Classification
| Article number | 094392 8 | |
| EAN / GTIN | 4062406129897 | |
| Manufacturer number | 094392 8 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Robust and durable thanks to the thumb and index finger made entirely of leather.
Driver's gloves made from supple and hard-wearing goatskin. With high-quality breathable textile back and very good sense of touch. Hook and loop fastening at the wrist. Inside of the gloves fully lined.
Driver's gloves made from supple and hard-wearing goatskin. With high-quality breathable textile back and very good sense of touch. Hook and loop fastening at the wrist. Inside of the gloves fully lined.
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- Protect hands against mechanical risks, abrasion, blisters, and other superficial injuries.
- Optimum protection is obtained only when the area to be protected is completely covered. Where gloves have fastenings, check that these are securely closed. Protective gloves must not be allowed to slip. Select a suitable glove size.
Reasonably foreseeable misuse
- Gloves offer no protection against chemical, microbiological, thermal, electrical or laceration risks.
- Do not wear when close to rotating machine parts.
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.