{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Fresa per sgrossatura e finitura in HMI HOLEX Pro Steel HPC 3 mm
Codice art.: 203054 3
Codice materiale:
- Materiale da taglio: HMI
- Norma: Norma interna
- Modello: N
- Tolerance nominal ⌀: 0 / -0.03
- No. of teeth Z: 4
Dettagli prodotto
Dati tecnici
| Series | ProSteel | |
| Cutting edge ⌀ DC | 3 mm | |
| Rivestimento | TiAlN | |
| Materiale da taglio | HMI | |
| Norma | Norma interna | |
| Modello | N | |
| Tolerance nominal ⌀ | 0 / -0.03 | |
| No. of teeth Z | 4 | |
| Helix angle | 38 degrees | |
| Helix angle characteristic | differente | |
| Spacing of the cutters | differente | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Scanalatura piena con profondità di taglio 1×D; 0,3×D per contornatura | |
| Shank | HB with h6 | |
| Passaggio interno per LR | no | |
| Machining strategy | HPC | |
| Flute length Lc | 8 mm | |
| Overhang length L1 incl. recess | 12 mm | |
| Recess ⌀ D1 | 2.8 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer width at 45° | 0.13 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.02 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.025 mm | |
| Colore collarino | verde | |
| Type of product | Frese per spallamenti |
Codice articolo e classificazioni
| Codice articolo | 203054 3 | |
| EAN / GTIN | 4045197712875 |
Tabella dati
P
260
P
240
P
180
P
160
M
80
K
250
Descrizione
Version:
For roughing and finishing.
Up to 1×D into solid material at very high feed rates with smooth cutting action. Dimensions to manufacturer’s standard.
Up to 1×D into solid material at very high feed rates with smooth cutting action. Dimensions to manufacturer’s standard.
Advantage:
Optimised flute form, eccentric relief ground, wide chip space.