{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Punta HPC in HMI, codolo cilindrico DIN 6535 HA 14,25
Codice art.: 122659 14,25
Codice materiale:
- Tool material: Solid carbide
- Standard: DIN 6537
- Version: 6×D
- Tolerance nominal ⌀: m6
- Number of cutting edges Z: 2
Dettagli prodotto
Dati tecnici
| Nominal ⌀ DC | 14.25 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6537 | |
| Version | 6×D | |
| Tolerance nominal ⌀ | m6 | |
| Number of cutting edges Z | 2 | |
| Point angle | 140 degrees | |
| recommended maximum drilling depth L2 | 61.7 mm | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | yes, with 25 bar | |
| Machining strategy | HPC | |
| Semi-Standard | yes | |
| Flute length Lc | 83 mm | |
| Overall length L | 133 mm | |
| Shank ⌀ Ds | 16 mm | |
| Shank tolerance | h6 | |
| Feed f in stainless steel > 900 N/mm2 | 0.2 mm/rev. | |
| Colour ring | blue | |
| Type of product | Jobber drill |
Codice articolo e classificazioni
| Codice articolo | 122659 14,25 | |
| EAN / GTIN | 4045197582980 |
Tabella dati
P
170
P
140
P
130
P
110
P
70
M
90
M
80
K
95
Descrizione
Version:
Cutting chisel edge with high centring accuracy due to strong core and special point geometry. High roundness and alignment accuracy of the deep hole, thanks to 4 guide chamfers. Outstanding chip evacuation due to 4 internal cooling channels from ⌀ 3.8 mm. Up to 3.7 mm ⌀ with 2 internal cooling channels. Straight major cutting edges with honed edges and special flute profile for short chips, even on long chipping materials.
Attention:
Sizes ending with X = cutter ⌀ tolerance h7.