{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Lightweight revolving lathe centre, Morse taper: 3
Article no.: 320675 3
Article code:
Product details
Technical Data
| Manufacturer’s designation | Leichte mitlaufende Drehbankspitze, Morsekegel: 3 | |
| Overall length | 151 mm | |
| Head diameter | 50 mm | |
| Type of centring point | tracking | |
| Point angle | 60 degrees | |
| Largest point diameter | 22 mm | |
| Bull-nosed taper at front | no | |
| Point length | 27.5 mm | |
| With push-off thread | no | |
| With clamping faces | no | |
| With carbide tip | no | |
| With shock absorbing | no | |
| Usable length | 70 mm | |
| Max. workpiece weight | 400 kg | |
| Maximum speed | 6,300 min-1 | |
| Maximum radial run-out | 0.005 mm | |
| Half centring point | no | |
| Replaceable centring points included | no | |
| Use | turning | |
| Weight | 2.89 kg | |
| Type of product | centring drill |
Identification & Classification
| Article number | 320675 3 | |
| EAN / GTIN | 5907412202754 | |
| Manufacturer number | 800006623 | |
| Manufacturer/responsible person | Bison Spanntechnik GmbH, Reisholzer Werftstraße 42, Halle 3, 40589 Düsseldorf, Germany, www.bison-chuck.com |
Description
Version:
- Point angle 60°.
- Lightweight version, maintenance-free.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For roughing and precision turning on lathes.