{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling SPMT 1806 EDSR-NB3T, for face mills / end mills, PR1810
Article no.: 224031 GG
Article code:
Product details
Technical Data
| Base form | square | |
| Width of insert B | 18 mm | |
| Thickness of insert S | 6.35 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 18 mm | |
| Diameter of insert d | 18 mm | |
| Corner radius R | 1.2 mm | |
| Corner chamfer length C | 3.1 mm | |
| Corner chamfer angle | 75 degrees | |
| Corner angle | 90 degrees | |
| Rake face chamfer width C | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Setting angle | 11 degrees | |
| Normal clearance angle (main cutting edge) | 11 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Point angle | 90 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 18 mm | |
| ISO-Code | SPMT 1806 EDSR-NB3T | |
| Attachment hole diameter | 6.8 mm | |
| Tool material | Carbide | |
| Cutting media, manufacturer’s designation | PR1810 | |
| Coating | Megacoat Nano | |
| Insert thickness T | 6.35 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Insert designation | SPMT1806EDER | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | cast iron (K) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | interrupted | |
| Weight | 19 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 224031 GG | |
| EAN / GTIN | 4960664027606 | |
| Manufacturer number | TLS00148 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
K
180
Description
Execuţie:
Geometrie specială a plăcuţelor amovibile pentru forţe de tăiere reduse şi evacuarea îmbunătăţită a aşchiilor. Toate tipurile cu tăişuri Wiper pentru avansuri mari.
Aplicaţie:
NB2T / NB3T: Ideale pentru tăiere întreruptă, putere ridicată de tăiere şi avansuri mari.
Notă:
Capetele sunt echipate alternativ cu un număr egal de plăcuţe amovibile forma NB2 şi NB3. Vă rugăm să ţineţi cont de compatibilitatea cu suportul.
Valori de referinţă pentru ae = 1×D.
Valori de referinţă pentru ae = 1×D.