{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling BGHX 15L5 PCTR, for Aluking tangential high-performance face mills / end mills, HB9710
Article no.: 214547 GG
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | unsuitable | |
| Wet maximum | unsuitable | |
| Manufacturer’s designation | BGHX 15L5 PCTR | |
| Dry machining | suitable | |
| Oil | unsuitable | |
| Air | suitable only under restricted conditions | |
| Base form | rectangular | |
| Insert width | 10 mm | |
| Blade thickness | 5 mm | |
| Insert length | 10 mm | |
| Insert version | right-hand | |
| Cutting edge length | 10 mm | |
| Cutting edge height | 5 mm | |
| ISO-Code | BGHX 15L5 PCTR | |
| Type of chip breaker | GG | |
| Tool material | Carbide | |
| Cutting media, manufacturer’s designation | HB9710 | |
| Coating | AlTiN | |
| Grade | HB9710 | |
| Insert thickness | 5 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | BGHX 15L5 PCTR | |
| Interface coding for insert according to ISO TS 13399-60 | BG15L5PC7R | |
| Insert designation | BGHX 15L5 PCTR | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Number of teeth | 2 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | Aluminium; non-ferrous materials (N) | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing | |
| Machining strategy | HPC | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered (T) | |
| Weight | 10 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 214547 GG | |
| EAN / GTIN | 4045197762108 | |
| Manufacturer number | 214547 GG | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
K
220
Description
Application:
For surfaces with roughness less than Rz 3 µm. Only for dry machining.
Note:
Standard application values for ae = 1×D / ap = 3 mm, ap max = 5 mm.