The latest generation of milling cutter GARANT Master Alu impresses with its particularly high performance in machining aluminium. The innovative high-performance milling cutters are characterised by long service life, and achieve extreme feed rates and cutting speeds. Highest surface qualities can be achieved in a short space of time, thus achieving extraordinarily high efficiency in machining.
The extensive product line GARANT Master Alu provides the ideal solution for every machining task, be it finishing, roughing, plunging (drilling) or ramping. Furthermore, the HPC tools are available uncoated or with the latest DLC coating (also with geometry for plunging). The colour of the coating is based on the ISO code colour, enabling all employees to identify the application field of the milling cutter quickly and easily.
The tool geometry is designed especially for grooving and contour milling. The GARANT Master Alu solid carbide milling cutter is available uncoated or with the latest generation DLC coating in green (in line with the ISO code).
Note: The milling cutters have a special ground finish to counteract the unbalance. This ensures the best possible balancing quality of G1.8 and also achieves the best possible balancing quality at high speeds for each diameter.
Especially suitable for plunging (drilling) and ramping. The innovative end face geometry permits highest feed rates and avoids build-up of chips when drilling. The GARANT Master Alu PickPocket is available in five different versions: uncoated or with the latest generation of DLC coating in green (in line with the ISO code), with and without internal cooling, with short or long shank for working at greater depths. It therefore offers an ideal solution for every processing task.
Recommendation: At maximum feed rates, wet machining is preferred in order to prevent an adhesion of the machining material, which can occur at high temperature.
With chip separators for controlled chip breaking.
Recommendation: Due to the high heat generation during TPC milling in non-ferrous metals, the use of wet machining is preferable. The formation of built-up edges in particular is thus counteracted as much as possible. In turn, the cutting data ae can be increased.
1. Defined cutting edge preparation to ensure process reliability and very high surface qualities.
2. Variable helical pitch to prevent vibration and promote a homogeneous cutting action.
3. Face geometry recessed on the inside for reliable helix milling and plunging.
4. Solid carbide grade with outstanding bending strength, designed for machining non-ferrous materials.
5. Latest generation of DLC coating in green.
6. Reinforced core diameter for stability and optimised force distribution during TPC milling operation.
7. Chip separator design and arrangement for extra-short chips to avoid chip nest formation.
8. Optimised flutes specially for TPC machining of aluminium to prevent chip jams and for ideal chip evacuation.
The GARANT Master Alu finishing cutter with 5 cutting edges is particularly effective for finishing operations. Its edge preparation is designed especially for the main application of machining aluminium, making it much sharper than tools designed for machining steel. Comparison of the honed cutting edges: GARANT Master Alu solid carbide finishing cutter r= 3,599 µm vs. GARANT Master Steel solid carbide finishing cutter r= 9,721 µm.
The milling cutter is available in three lengths – all have the latest generation of DLC coating in green (in line with the ISO-Code).
Especially suited to plunging (drilling) and ramping. The innovative end face geometry permits highest feed rates and avoids build-up of chips when drilling. The GARANT Master Alu SlotMachine is available in three different versions: with or without internal cooling, with short or long cutting edge. All versions have the latest generation of DLC coating in green (in line with the ISO-Code).
Application recommendation: At maximum feed rates, wet machining is preferred in order to prevent an adhesion of the machining material, which can occur at high temperature!
Our competent expert advisers will be happy to give you individual advice on any milling query and will help you to find the right tool for your particular application. We are happy to offer you personal advice, by phone or e-mail.