• Please note that the navigation structure for the Machining section has been revised. If you had filters set for the previous categories Mono-machining and Modular-machining, please check the newly set filters.
Article no.: 137813

Machine tap for synchronised spindles HSS-E-PM Form E TiAlN

on request
Deliverable
45 pieces in stock
Price
from 
113,39 €
plus VAT at the current rate Prices plus delivery costs
Brand: GARANT
Thread type: G
Flank angle: 55 °
Standard: Manufacturer’s standard
Taper lead form: E
Helix angle: 40 °
Shank: DIN 1835 B to h6
Application for type of drilling: up to 3×D for blind holes
Cutting direction: right-hand
Type of threading tool: Machine tap for synchronous machining

Information

  • Thread type: G
  • Flank angle: 55 °
  • Standard: Manufacturer’s standard
  • Taper lead form: E
  • Helix angle: 40 °

Description

Version:

Sturdy version with right-hand helix and shank to DIN 1835-B. Special geometry for general-purpose use on machines with synchronised spindle drive. The tap is controlled by the synchronising spindle of the machine. Special TiAlN-S coating for optimum tool life. For use with emulsion (fat content minimum 8%).
Form E (lead chamfer: 1.5 - 2 turns) for the deepest possible thread depths.

Application:

For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connection).

Note:

For use on synchronised spindles, the GARANT quick-change tapping chuck No. 338100338121 with minimum length adjustment (MLA) ensures very high process reliability.

Create new article code

Change article code

By means of article codes you can record your internal item numbers in the eShop.

Share this product

or copy this link

Add to shopping list

To shopping cart