{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Shrink-fit unit, Type: SU1
Article no.: 354210 SU1
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Very easy to use, including by selecting pre-parametrised shrink processes.
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Product details
Technical Data
| Plug type, input | F | |
| Suitable for countries | Austria; Belgium; Czech Republic; France; Germany; Netherlands; Poland | |
| Power consumption | 11.000 W | |
| AC supply voltage | 400 V | |
| Mains frequency | 50 Hz | |
| Series | SU1 | |
| Manufacturer’s designation | Schrumpfgerät GARANT SU1 | |
| Power supply | mains-powered | |
| Height | 986 mm | |
| Width | 700 mm | |
| Depth | 533 mm | |
| Weight | 45 kg | |
| Performance | 11 kW | |
| Cooler | yes | |
| Shrink-fit diameter min. | 3 mm | |
| Shrink-fit diameter max. | 32 mm | |
| Shrink-fit length max. | 500 mm | |
| Type of product | shrink-fit unit |
Identification & Classification
| Article number | 354210 SU1 | |
| EAN / GTIN | 4045197801777 | |
| Manufacturer number | 354210 SU1 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Description
Version:
Shrink-fit unit with integral cooling at the shrink-fit chuck position.
Maximum shrink-fit tool length 500 mm.
Storage for screening plates.
GARANT SU1 shrink-fit unit.
Maximum shrink-fit tool length 500 mm.
Storage for screening plates.
GARANT SU1 shrink-fit unit.
Application:
- For contour-dependent cooling.
- For shrinking shanks of carbide and HSS in and out.
- Shrink range 3 − 32 mm.
Supplied with:
- 4 screening plates ⌀ 3 − 32 mm No. 354240.
- Clamping ring.
- 1 pair heat-resistant gloves.
Optional extras:
Warning:
Intended use
Reasonably foreseeable misuse
- For clamping tools with shanks made of carbide and HSS in suitable clamping chucks by shrinking.
- Maximum shrink-fit tool length 500 mm.
- For use as a bench-top device.
- For work in industrial environments.
- Use only on a flat and clean base.
- Shrink only clean tools in clean chucks.
- Use only original spare parts and wearing parts.
- Use only when correctly assembled and with safety devices and guards on the machine fully operational.
- Use only when it is technically in good condition and safe to operate.
Reasonably foreseeable misuse
- Do not use unsuitable chucks.
- Do not use any highly flammable cleaning agents.
- Not for use in areas where high concentrations of dust, flammable gases, vapours or solvents are present.
- Do not use in explosion hazard areas.
- Do not make any unauthorised modifications.
- Not for use where there is exposure to intense heat, direct sunlight, naked flames or liquids.