{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Bearing extractor separately 0
Article no.: 884700 0
Copy
Article code:
Copy
Product details
Technical Data
| Manufacturer's designation | 18 | |
| Length of draw bolt | 180 mm | |
| Clamping depth | 120 mm | |
| Connection thread | M10 | |
| Type of product | Puller |
Identification & Classification
| Article number |
884700 0
Copy |
|
| EAN / GTIN |
4021176075599
Copy |
|
| Manufacturer number |
18-0
Copy |
|
| Manufacturer/responsible person | Kleinbongartz & Kaiser oHG, Heinrich-Hertz-Straße 5, 40704 HILDEN, Deutschland, www.kukko.com |
Description
Version:
Bearing separator of high-quality tool steel.
Separator: The quick-release semicircular jaws are symmetrically tensioned by a screw. This causes the wedge-shaped jaws to insert themselves between bearings and shaft.
Extractor: Used in conjunction with the separator to extract bearings from their seating (for this the draw bolts are screwed into the threaded holes in the separation jaws).
Separator: The quick-release semicircular jaws are symmetrically tensioned by a screw. This causes the wedge-shaped jaws to insert themselves between bearings and shaft.
Extractor: Used in conjunction with the separator to extract bearings from their seating (for this the draw bolts are screwed into the threaded holes in the separation jaws).
Application:
For the separation of tightly wedged ball bearings, gears, etc., if the gap is too small for normal extraction arms.
Suitable for:
Bearing separator No. 884600.: 0