{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
2 x One-handed clamp EZS 110/40
Article no.: EZS11-4SET
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Type of product | Clamp |
Identification numbers & Classifications
| Article number | EZS11-4SET | |
| EAN / GTIN | 4008158041117 | |
| Manufacturer number | EZS11-4SET | |
| L-Number | L80030 392 |
Description
Description:
- Clamping force up to 2,700 N
- Conversion for spreading – tool-free with EZM, EZL, EZXL thanks to simple release mechanism at the touch of a button on the top section
- Ergonomically shaped 2-component plastic handle with pump mechanism and integrated release lever behind the rail
- Protective caps with cross prism on the top for securely holding round, pointed and angular parts
- One-handed operation with little effort required
- On carded hang pack
Feature:
- Overhead: 40 mm
- Contents: 2 x EZS11-4
- Material / surface:
- Rail made of steel hardened, burnished
- Lever made of reinforced PA6 plastic
- Upper and lower part made of reinforced PA6 plastic
- Plastic protective caps
- Rail: 7x2.5 mm
- Clamping force: 200 N
- Wingspan: 110 mm
- Spreading second: 80-190 mm
Advantage:
Multiple applications
- The one-handed EZ range offers numerous possible applications:
- due to a diverse range in four sizes with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2,700 N
- due to the cross prism integrated in the plastic protective caps for the secure fastening of round, pointed and angular pieces
- due to conversion of the top section from clamping to spreading – with sizes EZM, EZL and EZXL tool-free thanks to release mechanism at the touch of a button
- The entire range offers ergonomic handling, thanks to sophisticated technology:
- due to the high quality 2-component plastic handle with pump lever behind the rail for safe access from both directions
- due to the release handle integrated in the grip for quick adjustment of the sliding bar and for releasing the clamp
- Modern aesthetics meet with longevity here:
- due to the use of high-quality materials, such as fibreglass-reinforced polyamide for the top and bottom, as well as hardened, tempered, and burnished steel for the profiled rails
- due to the plastic housing, the grip mechanism is protected from dust and chips
- due to the use of high-quality materials, such as fibreglass-reinforced polyamide for the top and bottom, as well as hardened, tempered, and burnished steel for the profiled rails
- due to the high quality 2-component plastic handle with pump lever behind the rail for safe access from both directions
- due to the cross prism integrated in the plastic protective caps for the secure fastening of round, pointed and angular pieces
- due to a diverse range in four sizes with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2,700 N
Application:
- Interior fittings
- DIY
- Furniture and joinery works
- Staircase construction
- Dry construction
- Kitchen construction and shop fitting
- One-handed clamping and spreading
Note:
- Danger warnings:
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Care instructions:
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents