{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
COMBIDISC felt discs CDR-FR dia. 50mm for pre-polishing and high-gloss polishing
Article no.: 4007220004784
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Type of product | Polishing wheel |
Identification numbers & Classifications
| Article number | 4007220004784 | |
| EAN / GTIN | 4007220004784 | |
| Manufacturer number | 42003050 | |
| L-Number | L51050 128 |
Description
Description:
Suitable for polishing with polishing paste bars, grinding pastes or diamond polishing pastes in face-down grinding on small and medium-sized surfaces. The CDR clamping system has a threaded connection with male thread (plastic) on the tool side. Also suitable for the following commonly used systems: Roloc™, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On.
Feature:
- Clamping system: CDR system
- RPM, optimum, from: 2000 RPM
- RPM, optimum, to: 4000 RPM
- Dia. external, metric: 50 mm
Advantage:
- High economic efficiency as tool can be changed quickly.
- Very comfortable due to ease of use and low-vibration working.
- No disruptions in use due to adhesion, slipping or coming loose.
Application:
- Recommendations for use: Use COMBIDISC felt discs with an abrasive disc holder on flexible shaft drives with an angle handpiece, or small compressed-air or electric angle grinders. Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools. When applying a different polishing paste, use a new unused felt disc. For the best results, use at a recommended cutting speed of 5-10 m/s. This provides an ideal compromise between polishing performance, thermal load on the workpiece and tool wear.
- Applications: Polishing
- Drive types: Angle grinder; Cordless angle grinder; Flexible shaft drive; Straight grinder
Material:
- Materials that can be worked:
- Aluminium
- Brass
- Bronze
- Cast steel
- Cobalt-based alloys
- Copper
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
- Nickel-based alloys (e.g. Inconell and Hastelloy)
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Thermoplastics
- Titanium
- Titanium alloys
- Zinc
- Materials that can be worked: Aluminium; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc
Suitable for:
Use COMBIDISC felt discs with abrasive disc holder on flexible shaft drives with angle handpiece, small compressed air or electric angle grinders.
For best performance, use at a recommended cutting speed of 5-10 m/s. This achieves an ideal compromise between removal rate, surface finish, temperature load on the workpiece and tool wear. This achieves an ideal compromise between polishing performance, temperature load on the workpiece and tool wear.
When changing the polishing compound, use a new, unused felt wheel.
For best performance, use at a recommended cutting speed of 5-10 m/s. This achieves an ideal compromise between removal rate, surface finish, temperature load on the workpiece and tool wear. This achieves an ideal compromise between polishing performance, temperature load on the workpiece and tool wear.
When changing the polishing compound, use a new, unused felt wheel.
Supplied with:
- Please order arbor separately.
Note:
- The maximum permitted peripheral speed is 50 m/s.