{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Service MANOSKOP torque wrench w.mount for insert tools No. 730 Fix Values only for in-lb 90-450in lb Inside square stitch size 9 x 12 mm L. 330mm
Article no.: 96583005
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Type of product | Torque Wrench |
Identification numbers & Classifications
| Article number | 96583005 | |
| EAN / GTIN | 4018754269785 | |
| Manufacturer number | 96583005 | |
| L-Number | L60010 6507 |
Description
Description:
- For work in series production
- The control knob can be unscrewed after the tripping torque has been set - this prevents the target torque from being accidentally changed
- The supplied TORX® TAMPER-RESISTANT locking screw also protects against tampering. As well as the enclosed adhesive seals. No adjustment possible without breaking the seal
- triggering
- No reset to ″0″ is required, as the measuring element is only loaded during tightening
- Receptacle for interchangeable plug-in tools
- QuickRelease security interlock
- Quick, precise adjustment with QuickSelect quick adjustment
- Double stop signal
- Very easy to read dual scale with color distinction of N·m/ft·lb or ft·lb/in·lb
- Tighten to the left by turning the plug-in tools over
- Continued load after tripping or loads against the operating direction, e.g. when screws are stuck, do not affect the tripping mechanism, which is thus protected against damage
- 2-component handle with easy-to-use green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)
- Calibration with the perfectControl® calibration device No. 7794 or the calibration device No. 7706. If necessary Recalibration without disassembly
- Certificate according to DIN EN ISO 6789-2:2017
- DBGM
- In the sturdy plastic box (size 80-100 in the steel box)
- Display deviation ± 3%
Feature:
- Fine scale division: 2,5 in·lb
- Gr.: a/5
- Height mm (h): 23 mm
- Length [mm): 330 mm
- LF: 280,5 mm
- Measuring range ft-lb: 7-37 ft·lb
- Measuring range in-lb: 90-450 in·lb
- Scale division [E1]: 50 in·lb
- Scale division [E2]: 1 ft·lb
- SF: 17,5 mm
- Size hex. drive [inner square]: 9 x 12 mm
- Weight: 832 g
- Weight with box: 1638 g
- Width mm (b): 28 mm