{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Elément de base Queue CM, avec arrosage interne, 5×D, Type: 13
Réf.: 232273 13
Référence:
Détails du produit
Caractéristiques techniques
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially angled | |
| Cooling lubricant | yes | |
| Interface position | on the machine; on the machine; on the machine; on the machine | |
| Holder type | morse taper MT; morse taper MT; morse taper MT; morse taper MT | |
| Interface coding | MKG00202X95; MKG00202X95 | |
| Holder shape | with tang and cross wedge attachment; with tang and cross wedge attachment; with tang and cross wedge attachment; with tang and cross wedge attachment; with tang and cross wedge attachment; with tang and cross wedge attachment; with tang and cross wedge attachment; with tang and cross wedge attachment | |
| Holder version | dimensionless nominal size without cooling; dimensionless nominal size without cooling; dimensionless nominal size without cooling; dimensionless nominal size without cooling; dimensionless nominal size without cooling; dimensionless nominal size without cooling; dimensionless nominal size without cooling; dimensionless nominal size without cooling | |
| Holder size, no dimensions | 0020; 0020; 0020; 0020; 0020; 0020; 0020; 0020 | |
| Type of mounting | spigot; spigot; spigot; spigot; spigot; spigot; spigot; spigot | |
| Shank length LS | 104.9 mm; 104.9 mm; 104.9 mm; 104.9 mm | |
| Cutter diameter, min. Dc | 13 mm | |
| Body diameter D2 | 12.7 mm | |
| Flute length | 83.81 mm | |
| Distance from cutter corner to cutter tip | 2.62 mm | |
| Attachment length, holder | 109.6 mm | |
| Number of cutting edges, total | 2 | |
| Twist angle | 20 degrees | |
| Type of flute | 3 | |
| Angle, 1st step | 132 degrees | |
| Side rake angle | 0 degrees | |
| Relief angle | 0 degrees | |
| Guide elements | without guide elements | |
| Insert thickness T | 3.2 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | HOG-2322XX; HOG-2322XX13 | |
| Interface coding for insert according to ISO TS 13399-60 | HOG-2322XX13 | |
| Insert designation | 232286 13 | |
| Interface | joint 1; joint 1 | |
| Gauge length A | 120.7 mm | |
| Usable length L1 | 66.7 mm | |
| Overall length L | 195.7 mm | |
| Functional length | 120.7 mm | |
| Weight | 219 g | |
| Cutting direction | right-hand cutting | |
| Tool version | steel support with soldered hard material cutter inserts to DIN ISO 513 (Hx, Cx, Bx, Dx) | |
| Data carriers | without data carrier | |
| Machining method | drilling into solid material | |
| Type of product | indexable drill for cutter inserts | |
| Content | single part |
Identification et classification
| Référence article | 232273 13 | |
| EAN / GTIN | 4062406105938 | |
| Réf. fabricant | 232273 13 | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |