{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 5 mm | |
Coating | TiAlN | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | H | |
Tolerance nominal ⌀ | h10 | |
No. of teeth Z | 6 | |
Helix angle | 50 degrees | |
Direction of infeed | horizontal and oblique | |
Cutting width ae for milling operation | 0.05×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Flute length Lc | 13 mm | |
Overall length L | 57 mm | |
Shank ⌀ Ds | 6 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for side milling in steel < 55 HRC | 0.016 mm | |
Colour ring | red | |
Type of product | End / face mill |
Article number | 203240 5 | |
EAN / GTIN | 4045197118974 | |
Manufacturer number | 203240 5 |
This article |
Recommendations |
|||
---|---|---|---|---|
Solid carbide end mill, TiAlN, ⌀ h10 DC: 5mm
on request
In stock
46 pieces in stock
33,81 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
482 pieces in stock
57,04 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
302 pieces in stock
121,90 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
151 pieces in stock
30,48 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Corner chamfer angle | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
Colour ring | red | red | red | red |
Through-coolant | no | no | no | no |
Standard | DIN 6527 | DIN 6527 | Manufacturer’s standard | DIN 6527 |
Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
Helix angle | 50 degrees | 50 degrees | 45 degrees | 45 degrees |
Direction of infeed | horizontal and oblique | horizontal and oblique | horizontal and oblique | horizontal and oblique |