{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Komet KUB Trigon® indexable drill with ABS® shank, for indexable inserts WOEX
Article no.: 236635 14
Article code:
Product details
Technical Data
| Series | KUB Trigon® | |
| Number of cutting edges, total | 1 | |
| Cutter diameter, min. Dc | 14 mm | |
| Overall length L | 108 mm | |
| Usable length L1 | 42 mm | |
| Gauge length A | 77 mm | |
| Shank diameter DS | 50 mm | |
| Through-coolant | yes | |
| Holder type | plain shank | |
| Wet minimum | suitable | |
| Interface position | on the machine | |
| Interface coding | ABS05000115 | |
| Length of shank LS | 31 mm | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | KOMET KUB Trigon® Wendeplatten-Vollbohrer | |
| Cutter diameter, max. Dc | 15 mm | |
| Flute length | 42 mm | |
| Twist angle | 25 degrees | |
| Angle, 1st step | 180 degrees | |
| Interface | joint 1 | |
| Insert thickness T | 2.38 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | WO0302043N | |
| Insert designation | WOEX 030204 10-... | |
| Weight | 470 g | |
| Cutting direction | right-hand cutting | |
| Machining method | drilling into solid material (BVB) | |
| Type of product | indexable drill for cutter inserts | |
| Maximum adjustment limit V | 0.5 mm | |
| Drill depth for indexable insert drill up to | 3×D | |
| Use for drilling | Aperture; Centre drilling; limited cross-drilling; limited cross-drilling; oblique exit; oblique spot drilling; oblique spot drilling | |
| Content | single part |
Identification & Classification
| Article number | 236635 14 | |
| EAN / GTIN | 4047109099463 | |
| Manufacturer number | V30 71403 | |
| Manufacturer/responsible person | Ceratizit Besigheim GmbH, Zeppelinstraße 3, 74354 Besigheim, Germany, www.kometgroup.com |
Description
Version:
- Special manufacturing procedure for extremely large flutes with very high rigidity.
- Specific positioning of the indexable inserts for bores free of withdrawal marks and with precise dimensional stability(± 0.1 mm as a rule).
- Internal coolant supply is directed to the cutting edges (sophisticated geometry, ideal for minimum lubrication).
- 3 − 10 bar coolant pressure is sufficient.
- For stationary and rotating applications.
- Offset-axis drilling: dependent on ⌀ up to 1.5 mm.
Application:
Supplied with:
Clamp screws (without indexable inserts).
Note:
- Note! A disc falls off when the drill exits. Risk of injury if the component is rotating! Please take safety precautions.
- On request − left-hand cutting; − 2×D, − other ⌀; − special types − torsional vibration damper for ABS giving low-vibration machining, with maximum tool life and minimum noise level.