{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
GARANT Master Tap machine tap extra long HSS-E-PM Form C, AlTiX, G: G1/8
Article no.: 137807 G1/8
Copy
Article code:
Copy
- Thread type: G
- Flank angle: 55
- Tool material: HSS E PM
- Standard: Manufacturer’s standard
- Taper lead form: C
Product details
Technical Data
| Series | Master Tap | |
| Thread size | G1/8 | |
| Coating | AlTiX | |
| Thread type | G | |
| Flank angle | 55 degrees | |
| Tool material | HSS E PM | |
| Standard | Manufacturer’s standard | |
| Taper lead form | C | |
| Helix angle | 40 degrees | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 2.5×D for blind holes | |
| Cutting direction | right-hand | |
| Thread pitch | 0.907 mm | |
| Threads per inch | 28 | |
| Thread ⌀ | 9.73 mm | |
| Overall length L | 180 mm | |
| Shank ⌀ Ds | 7 mm | |
| Shank square □ | 5.5 mm | |
| Tapping hole ⌀ | 8.8 mm | |
| Type of threading tool | Machine tap for dynamic machining | |
| Number of clamping slots | 3 | |
| Colour ring | green | |
| Number of cutting edges Z | 3 | |
| Thread depth | 24.33 mm | |
| Type of product | Tap |
Identification & Classification
| Article number |
137807 G1/8
Copy |
|
| EAN / GTIN |
4062406209117
Copy |
|
| Manufacturer number |
137807 G1/8
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
N
ISO code:
24
suitable for / [m/min]
N
ISO code:
28
suitable for / [m/min]
N
ISO code:
16
suitable for / [m/min]
P
ISO code:
24
suitable for / [m/min]
P
ISO code:
24
suitable for / [m/min]
P
ISO code:
20
suitable for / [m/min]
P
ISO code:
10
suitable for / [m/min]
P
ISO code:
6
suitable for / [m/min]
M
ISO code:
8
suitable for / [m/min]
M
ISO code:
6
suitable for / [m/min]
K
ISO code:
16
suitable for / [m/min]
N
ISO code:
16
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
Universal taps, designed for use in a wide spectrum of materials with high process reliability.
With extra long shank.
- HSS-E-PM tool material for a high degree of wear resistance.
- Reduced coefficient of friction due to the new high-performance coating.
- Special geometry for optimum swarf evacuation.
With extra long shank.
Advantage:
Designed for tapping threads where access is difficult.
Application:
For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connection).