{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
High-precision countersink with unequal spacing and 3 drive flats 90°, TiAlN, External ⌀ Dc: 4,3mm
Article no.: 150132 4,3
Copy
Article code:
Copy
Click to enlarge image
Click to enlarge image
Shank with 3 clamping flats
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Countersink tip angle: 90
- Tool material: HSS
- Spacing of the countersink cutting edges: unequal spacing
- Number of cutting edges Z: 3
- Standard: DIN 335 C
Product details
Technical Data
| External ⌀ | 4.3 mm | |
| Coating | TiAlN | |
| Countersink tip angle | 90 degrees | |
| Tool material | HSS | |
| Spacing of the countersink cutting edges | unequal spacing | |
| Number of cutting edges Z | 3 | |
| Standard | DIN 335 C | |
| Shank | Shank with h9 and three drive flats | |
| Through-coolant | no | |
| smallest countersink ⌀ for holes from | 1.3 mm | |
| Overall length L | 40 mm | |
| Shank ⌀ Ds | 4 mm | |
| for countersunk screws ISO 2009, 2010, 7046, 7047 | M2 | |
| Feed f in steel < 500 N/mm2 | 0.08 mm/rev. | |
| Shank tolerance | h9 | |
| Colour ring | green | |
| Type of product | Stepped drill and countersink |
Identification & Classification
| Article number |
150132 4,3
Copy |
|
| EAN / GTIN |
4045197741905
Copy |
|
| Manufacturer number |
150132 4,3
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
N
ISO code:
75
suitable for / [m/min]
N
ISO code:
75
suitable for / [m/min]
N
ISO code:
50
suitable for / [m/min]
P
ISO code:
65
suitable for / [m/min]
P
ISO code:
50
suitable for / [m/min]
P
ISO code:
30
suitable for / [m/min]
P
ISO code:
18
suitable for / [m/min]
P
ISO code:
8
suitable for / [m/min]
H
ISO code:
8
suitable for / [m/min]
M
ISO code:
16
suitable for / [m/min]
M
ISO code:
10
suitable for / [m/min]
S
ISO code:
12
suitable for / [m/min]
K
ISO code:
25
suitable for / [m/min]
N
ISO code:
60
suitable for / [m/min]
N
ISO code:
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
All countersinks have 3 cutting edges. Special geometry with extremely unequal spacing and matching cutting edge preparation. Radially relief ground. Flutes ground from solid. Newly developed special TiAlN coating for long service life.
High-precision countersink, produced with tight manufacturing tolerances similar to DIN 335-C.
Three drive flats on the shank for use in a 3-jaw chuck.
High-precision countersink, produced with tight manufacturing tolerances similar to DIN 335-C.
Three drive flats on the shank for use in a 3-jaw chuck.
Advantage:
Very smooth cutting throughout the entire countersinking operation. Chatter-free running for perfect results and optimum tool service life.
Application:
High-precision countersinks for production of exactly round 90° countersunk surfaces.