{{ name }}
Art.-Nr. {{ combinedCodeWithHighlight }}
Sachnummer:
EAN / GTIN:
Herstellernummer:
Kat. Nr.:
Rafter clamp SPZ 600/120
Artikel-Nr.: SPZ60K
Sachnummer:
Bitte beachten Sie die Lieferzeit und eingeschränkte Beratung:
Diesen Artikel bestellen wir für Sie direkt beim Hersteller, da er nicht Bestandteil unseres Hauptsortiments ist und somit nicht bei uns auf Lager liegt.
InfosProduktdetails
Technische Daten
| Wersja | wersja gładka | |
| Kąt obrotu | 35 stopni | |
| Rodzaj produktu | Ściski | |
| Rodzaj ścisku | ściski | |
| Zasięg maks. | 120 mm | |
| Maks. siła mocowania | 12 000 N | |
| Rozstaw maks. | 600 mm | |
| Materiał ramion napinających | stal | |
| Grubość szyny ślizgowej | 13 mm | |
| Szerokość szyny ślizgowej | 27 mm | |
| Materiał szyny ślizgowej | stal | |
| Gwint wrzeciona | Gwint trapezowy | |
| Tryb obsługi | Obsługa oburącz | |
| Możliwość użycia do | drewno | |
| Z płytą dociskową | tak | |
| Zawartość | część pojedyncza |
Identifikation & Klassifikation
| Artikelnummer | SPZ60K | |
| EAN / GTIN | 4008158026930 | |
| Herstellernummer | SPZ60K | |
| L-Nummer | L80070 124 | |
| Hersteller/verantwortliche Person | BESSEY Tool GmbH & Co. KG, Muehlenwieserstraße 40, 74321 Bietigheim-Bissingen, Deutschland, www.bessey.de |
Beschreibung
Opis:
- Clamping force up to 12,000 N
- For all roofing and timber frame constructions
- SPZ 80 K with 17 mm hexagonal bolt and heat‐resistant pressure plate with sintered steel insert, which can be tilted up to 35°
Cecha szcz.:
- Overhead: 120 mm
- Material / surface:
- Fixed and sliding bracket made of tempered steel, galvanized
- Spindle with trapezoidal thread made of steel rolled and tempered, phosphated
- Steel toggle, galvanized
- Pressure plate made of steel, phosphated
- Rail: 27x13 mm
- Wingspan: 600 mm
Zaleta:
Hammer-in tip
- First of all, the tip is driven into the rafter. The clamp is then quickly closed, to allow you to start right away with powerful clamping.
- The broad impact surface makes it easier to drive in the clamp.
- With the SPZ 80 K, the special tilting pressure plate ensures problem-free clamping even when working with sloping parts. It can be tilted by up to 35°.
- The SPZ 80 K's tough hexagonal bolt allows powerful yet controlled tightening, with the help of a torque wrench.
Zastosowanie:
- Shell construction
- Carpentry and woodwork
- For clamping rafters and beams
Wskazówka:
- Danger warnings:
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Care instructions:
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean and oil the spindle regularly
- If the rail is shiny, roughen both narrow sides with emery cloth (100 grain)
- Clean and oil the pressure plate regularly