{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Surface roughness measuring tool PS1
Article no.: 498845 PS1
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Perfect for overhead measurements. Place on the part, start measurement, done. Even small components can be measured without any additional mounting.
Click to enlarge image
Includes a simple mounting for height adjustment. Even measurements on conical surfaces etc. are possible.
- Reversible reading: mm / inch
- Interface: RS232C interface; USB interface
Product details
Technical Data
| maximum measuring range | 350 µm | |
| Reversible reading | mm / inch | |
| Interface | RS232C interface; USB interface | |
| Measurement travel for longitudinal sensing | 1.75 / 5.6 / 17.5 / automatic mm | |
| Cut-off (λc) | 0.25; 0.8; 2.5 mm | |
| Scanning speed | 0.5 mm/s | |
| Evaluation unit length | 140 mm | |
| Evaluation unit width | 50 mm | |
| Evaluation unit height | 70 mm | |
| Weight of the evaluation unit | 0.4 kg | |
| Type of product | Surface roughness measuring device |
Identification numbers & Classifications
| Article number | 498845 PS1 | |
| Manufacturer number | 6910210 |
Description
Version:
Portable roughness measuring device for precise roughness measurement and documentation conforming to standards, using the stylus tracing method. With integral calibration standard. Automatic cut-off selection. Memory capacity for 15 profiles and up to 20,000 measured values. Phase correction Gauss filter to DIN EN ISO 16610-21 (supersedes DIN EN ISO 11562). Up to 5 measurement travels can be selected
Version - image:
Directly selectable parameters
Ra, Rz.
Freely programmable button
Direct access to any of 30 free choice parameters.
USB port
No driver required, recognises PS1.
Start button, right and left
Easy to use for left and right-handed users.
Contact point (2 µm) with removable protection cap
Measures to the standard at 0.7 mN gauging force.
Integral calibration standard
No external calibration standard required (patent applied for).
Large display
All information at a glance.
Ra, Rz.
Freely programmable button
Direct access to any of 30 free choice parameters.
USB port
No driver required, recognises PS1.
Start button, right and left
Easy to use for left and right-handed users.
Contact point (2 µm) with removable protection cap
Measures to the standard at 0.7 mN gauging force.
Integral calibration standard
No external calibration standard required (patent applied for).
Large display
All information at a glance.
Advantage:
- Error-free operation due to settings compliant with standards.
- Switch on and start measurement right away − intuitive, no training.
- 3 parameters directly with one keystroke, 25 built-in parameters.
Supplied with:
Supplied with feed unit, standard probe No. 499004 size 6 -350, roughness standard, including works calibration certificate, height adjustment, probe guard, charger / mains adapter, instruction manual, carrying case with shoulder strap and belt attachment, mini-USB cable.