{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Four-jaw lathe chuck steel with recessed mount DIN 702-4
Article no.: 312505
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Recessed mount to DIN 702-4 (fastening screw from rear).
Click to enlarge image
Description
Version:
- Gear scroll drop-forged, balanced, and hardened.
- Flanks of scroll and of jaw serrations are ground.
- Weight-reduced body of steel.
- High concentricity.
Drop-forged, resulting in a long working life and suitability for high speed machines.
Application:
For machine spindles with recessed centring mount or for mounting using a flange.
Standard:
DIN 702-4.
Material:
Steel
Supplied with:
1 set = 4 hardened inside jaws, stepped on the outside.
1 set = 4 hardened outside jaws, stepped on the inside.
1 clamping wrench and fastening screws or studs depending on the chuck.
1 set = 4 hardened outside jaws, stepped on the inside.
1 clamping wrench and fastening screws or studs depending on the chuck.
Optional extras:
Note:
DIN 702-4 satisfies the old standard DIN 6350-1.