{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Electrician’s screwdriver for Phillips, with Kraftform handle VDE fully insulated, Cross-head size: 2
Article no.: 668600 2
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Offers
Product details
Technical Data
| Tested up to | 1,000 V | |
| Manufacturer’s designation | 162 i PH VDE | |
| Quality and test seal | VDE | |
| Guideline / labelling | CE mark | |
| Version | straight | |
| Suitable for voltage testing | no | |
| Blade length | 100 mm | |
| Handle properties | ergonomic; non-slip | |
| Handle length | 105 mm | |
| Non-roll flats | yes | |
| Size of drive output, for Phillips screws (PH) | PH2 | |
| Type of product | screwdriver | |
| Material | special steel / special alloy | |
| Surface | chrome-plated | |
| Standard | DIN EN 60900; VDE 0682-201 | |
| Overall length | 205 mm | |
| Set | no | |
| Drive | handle | |
| Output drive | for Phillips screws (PH) | |
| Content | single part |
Identification & Classification
| Article number | 668600 2 | |
| EAN / GTIN | 4013288027313 | |
| Manufacturer number | 05006154001 | |
| Manufacturer/responsible person | Wera Werkzeuge GmbH, Korzerter Straße 21-25, 42349 Wuppertal, Germany, www.wera.de |
Description
Version:
Handle and blade fully insulated up to 1000 V to DIN EN IEC 60900 / VDE 0682-201. Each of these screwdrivers is individually tested in a water bath for insulation breakdown under high voltage.
Kraftform handle made of impact resistant plastic with integral soft zones facilitates torque transmission and thus protects hand and arm.
Blade of high-alloy special steel. Nicromatt chrome-plated surface, black tips or chemically nickel-coated Lasertip tips.
Kraftform handle made of impact resistant plastic with integral soft zones facilitates torque transmission and thus protects hand and arm.
Blade of high-alloy special steel. Nicromatt chrome-plated surface, black tips or chemically nickel-coated Lasertip tips.
Application:
For use at voltages up to 1000 V.