{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Komet KUB Pentron® indexable drill with plain shank, for indexable inserts SOGX
Article no.: 236602 20
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Series | KUB Pentron® | |
| Manufacturer’s designation | KOMET KUB Pentron® Wendeplatten-Vollbohrer mit Zylinderschaft, für Wendeschneidplatten SOGX | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL02501015 | |
| Holder shape | with longitudinal slot | |
| Holder version | metric | |
| Holder size, metric | 0250 mm | |
| Shank diameter DS | 25 mm | |
| Shank length LS | 56 mm | |
| Cutter diameter, min. Dc | 20 mm | |
| Flute length | 114 mm | |
| Distance from cutter corner to cutter tip | 0.3 mm | |
| Number of cutting edges, total | 2 | |
| Twist angle | 10 degrees | |
| Angle, 1st step | 90 degrees | |
| Guide elements | without guide elements | |
| Interface coding for insert | SO0602063N | |
| Insert designation | SOGX 060206 18-... | |
| Interface | joint 1 | |
| Gauge length A | 118 mm | |
| Usable length L1 | 100 mm | |
| Overall length L | 174 mm | |
| Weight | 300 g | |
| Cutting direction | right-hand cutting | |
| Tool version | steel support with soldered hard material cutter inserts to DIN ISO 513 (Hx, Cx, Bx, Dx) | |
| Machining method | drilling into solid material (BVB) | |
| Machining strategy | HPC | |
| Type of product | indexable drill for cutter inserts | |
| Content | single part |
Identification & Classification
| Article number | 236602 20 | |
| EAN / GTIN | 4047109181571 | |
| Manufacturer number | U45 12000 | |
| Manufacturer/responsible person | Plastics & Seals s.r.l., Via Bene Vagienna 19, 12060 Lequio Tanaro, Italia |
Description
Version:
- Very high performance and long tool life thanks to optimised base body strength and special surface treatment.
- Best dimensional accuracy under very difficult drilling conditions.
- Stock costs reduced because internal and external inserts are identical.
- Offset-axis drilling is possible up to Vmax = 0.25 mm. Maximum ⌀ = D + 0.5 mm achievable by offsetting.
Bore tolerance: ⌀D − 0.1 / + 0.35
Application:
Supplied with:
Clamp screws (without indexable inserts).
Recommendation:
When spot-drilling reduce the feed rate by 70 %.
Note:
Version 2×D and 3×D with ABS® also available on request in imperial sizes.
Version with PSC shank available on request.
Version with PSC shank available on request.