Threads “Go” / “No Go” plug gauge
Article no.:
486000
- Calibration: L10
Description
Version:
The ground first thread pitch removes coarse swarf in the component and prevents premature fracture of the first thread pitch. Version to DIN 2279 - 2299.
“Go” and “No Go” ends on a single handle (DIN 2240, part 1, form R). “No Go” end marked red.
“Go” and “No Go” ends on a single handle (DIN 2240, part 1, form R). “No Go” end marked red.
Application:
For metric ISO threads, right-hand DIN 13.
Tolerance class 6H (up to M 1.4 = 5H).
Tolerance class 6H (up to M 1.4 = 5H).
Standard:
Tolerances and dimensions to DIN ISO 1502.
Note:
Thread gauges for threads with other pitches, Whitworth, trapezoidal, round, UNC, UNF, NPT, and LH threads available on request.