{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
Solid carbide milling cutter MTC DLC
Article no.: 202272
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: W
- Helix angle characteristic: unequal spacing
- Cutting width ae for milling operation: Full slot cutting depth 1×D; 0.5×D for side milling
Description
Version:
With the latest generation of DLC coating sp2.
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium components.
Without 45º corner chamfer.
Lengths similar to DIN 6527 long.
Size 1–2 – tolerance: Size nominal ⌀ DC = e8.
Size 2.5–20M – tolerance: Size nominal ⌀ DC = h6.
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium components.
Without 45º corner chamfer.
Lengths similar to DIN 6527 long.
Size 1–2 – tolerance: Size nominal ⌀ DC = e8.
Size 2.5–20M – tolerance: Size nominal ⌀ DC = h6.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.