{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Torque screwdriver with scale, to take interchangeable blades 1600 cNm
Article no.: 659957 1600
Article code:
- Direction of tightening: Right-hand tightening
- Torque measuring accuracy: ±6
- Test certificate: Manufacturer’s test certificate
Product details
Technical Data
| maximum torque | 1,600 cNm | |
| Direction of tightening | Right-hand tightening | |
| Torque measuring accuracy | ±6 % | |
| Test certificate | Manufacturer’s test certificate | |
| Overall length L | 126 mm | |
| Torque range | 320 cNm - 1,600 cNm | |
| Torque range | 3.2 Nm - 16 Nm | |
| Scale graduation, 1 graduation = | 25 cNm | |
| suitable interchangeable blades | 8 mm | |
| Display | analogue | |
| Release signalling | acoustic; haptisk | |
| Trigger principle | mechanical short travel release | |
| Connection format | exchangeable blade | |
| Measurement technology | mechanical | |
| Torque fixed setting | no | |
| Data can be recorded | no | |
| Setting the trigger value | with adjustment scale | |
| Feedback | triggering | |
| Measurement process | Torque | |
| Adjustable trigger value | adjustable | |
| Standard | DIN EN ISO 6789 | |
| Type of product | Torque screwdriver |
Identification numbers & Classifications
| Article number | 659957 1600 | |
| EAN / GTIN | 7610733291724 | |
| Manufacturer number | 8326.A 3,2-16 NM |
Description
Version:
Power grip with non-allergenic elastomer coating allows transmission of the required torque with no problems even with wet or oily hands. On reaching the set torque value, the screwdriver can be felt and heard to trigger and is then again immediately ready for use. The release torque is higher than the tightening torque (overload protection).
The desired torque is set using an adjustment wheel at the end of the handle. Putting the wheel into the locked position prevents inadvertent changes to the setting. Easy to read micrometer scale, protected against dirt.
The desired torque is set using an adjustment wheel at the end of the handle. Putting the wheel into the locked position prevents inadvertent changes to the setting. Easy to read micrometer scale, protected against dirt.
To take 8 mm interchangeable blades (No. 659870 − 659884). With pistol grip for delivering high torques.
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.