{{ name }}
Cod articol. {{ combinedCodeWithHighlight }}
Codul articolului:
EAN / GTIN:
Număr producător:
Nr. cat.:
Pereche de mănuşi MASTER CUT D, Mărimea mănuşilor: 10
Cod articol.: 094446 10
Codul articolului:
Detalii despre produs
Date tehnice
| Series | Master Cut | |
| Quality and test seal | Oeko-Tex® Standard 100 | |
| ESD protected area (EPA) | no | |
| Contents pairs | 1 pair | |
| Cut protection class, EN 388 | D; D | |
| Version, EN 388 | EN388:2016 | |
| Resistance to abrasion | 4 | |
| Resistance to cuts (Coupe test) | 4 | |
| Tear propagation resistance | 4 | |
| Resistance to penetration | 2 | |
| Resistance to cuts (TDM) | D | |
| Impact protection | not defined | |
| Material of coating, the palms of the hands | nitrile foam | |
| EN 388 code | 4442D | |
| Colour | grey; orange; black | |
| Type of product | gloves | |
| Area of application | cut protection | |
| Glove size | 10 | |
| Accuracy of fit | fitting | |
| Scope of application | all-round; precision | |
| Closure | no | |
| Version | five-fingered | |
| Reuse | reusable | |
| Unit | pair | |
| Knitted technology (fineness) | 18G | |
| Standard | EN 388; EN ISO 21420 | |
| Backing material | special yarn | |
| Coating | the palms of the hands | |
| Lined | no | |
| Characteristics | reinforced crook of the thumb | |
| Protection category | II |
Identificare și clasificare
| Cod articol | 094446 10 | |
| EAN / GTIN | 4062406273439 | |
| Număr producător | 094446 10 | |
| Producător/responsabil | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Descriere
Version:
GARANT Master Cut cut-resistant gloves. Close-fitting and extremely comfortable thanks to 18-gauge knit. Pleasant nitrile micro-foam coating for exceptionally good sense of touch and high level of dexterity. With reinforced thumb joint for increased working life.
Cut resistance level D, completely without glass or steel fibres.
Cut resistance level D, completely without glass or steel fibres.
Standard:
EN 388; EN ISO 21420
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- Protect hands against mechanical risks, abrasions, blisters and cutting hazards. For precision work.
- Optimum protection is obtained only when the area to be protected is completely covered. Where gloves have fastenings, check that these are securely closed. Protective gloves must not be allowed to slip. Select a suitable glove size.
Reasonably foreseeable misuse
- Offer no protection against chemical, microbiological, thermal or electrical hazards.
- Do not wear when close to rotating machine parts.
- Do not continue using gloves following contact with sharp-edged items.
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.