{{ name }}
Cod articol {{ combinedCodeWithHighlight }}
Codul articolului:
EAN / GTIN:
Număr producător:
Cuţit de strung tip eco 20/3 mm
Cod articol: 273836 20/3
Codul articolului:
- Răcire interioară: da
Detalii despre produs
Date tehnice
| Serie | Eco | |
| Lăţime de canelare w | 3 mm | |
| Tip de utilizare | pe stânga | |
| Răcire interioară | da | |
| ⌀ maxim | 60 mm | |
| Adâncime de retezare tmax | 30 mm | |
| Lăţimea funcţională L4 | 21,5 mm | |
| Lungime cap L1 | 49 mm | |
| Lăţimea cozii b | 20 mm | |
| Lungimea totală L | 108 mm | |
| Şurub | 279815 6 (TX25; 6 Nm) | |
| Este posibilă canelarea axială | nu | |
| Tip produs | Cuţit de strunjit |
Numere de identificare și clasificări
| Cod articol | 273836 20/3 | |
| EAN / GTIN | 4045197517340 |
Descriere
Version:
Made of high-tensile tool steel (> 1300 N/mm2). In conjunction with the convex insert clamping, the system achieves very high resistance to axial and radial cutting forces and thereby significantly increases the surface quality and productivity.
10×w
Note:
Maximum ⌀ = limited workpiece ⌀ due to the tool type.
From 19.5 mm groove depth (up to groove width 3 mm) and from 24.5 mm groove depth (from groove width 4 mm) the second cutter comes into contact with the workpiece. This can lead to scoring.
If necessary, use single-cutter grooving inserts No. 273656 – 273670.
Coolant transfer only possible in conjunction with GARANT Master eco toolholders No. 319006 − 319136.
From 19.5 mm groove depth (up to groove width 3 mm) and from 24.5 mm groove depth (from groove width 4 mm) the second cutter comes into contact with the workpiece. This can lead to scoring.
If necessary, use single-cutter grooving inserts No. 273656 – 273670.
Coolant transfer only possible in conjunction with GARANT Master eco toolholders No. 319006 − 319136.